email us

We stock throttle and brake levers for all years of the Kitty Cat. The stock lever, part number 0302-085, was recently discontinued, but we've been able to verify that the stock lever for the Arctic Cat 120 line fits and works properly, although the lever is slightly longer. This lever comes with a stock replacement pin and circlip and fits both the throttle and brake position on all years of the Kitty Cat. We sell these kits individually, so if you need one replacement lever, order a quantity of 1 below.

We stock genuine Arctic Cat throttle lever blocks for 1981-1999 Arctic Cat Kitty Cat snowmobiles. This is the plastic block that is pinned to the right side of the handlebars that the throttle lever pins to. The Arctic Cat part number for this item is 0302-165.

We stock genuine Arctic Cat brake lever blocks for 1980-1999 Arctic Cat Kitty Cat snowmobiles. This is the plastic block that is pinned to the left side of the handlebars that the brake lever pins to. The Arctic Cat part number for this item is 0302-147.

We stock genuine Arctic Cat brake bands for Kitty Cats. The Arctic Cat part number for this brake band is 3602-054, which replaces part number 0300-162. According to Arctic Cat, this is a stock replacement part for all 1972-1999 models, but we have come across a few Kitty Cats from the 1970s that this band will not work on. If your brake band looks like the bottom picture to the left, this part WILL NOT work for you as that part mounts differently than this band. If your brand band looks like the top picture to the left, this band will mount up properly.

We stock genuine Arctic Cat carburetors for 1977-1999 model Kitty Cat snowmobiles. The Arctic Cat part number for this carburetor is 3004-036, which has replaced part number 3002-618 on some models in this year range. This carburetor comes fully assembled with stock jetting installed.

We stock carburetor replacment kits for 1972 and 1973 Arctic Cat Kitty Cat snowmobiles. The original carburetors for these machines are no longer available from Arctic Cat, and we are no longer able to get parts to rebuild them, so we developed this kit. Our kit comes with a new modified genuine Arctic Cat carburetor (stock carb for 1977-1999 models), our custom made aftermarket aluminum airbox assembly (the stock 1972-1973 airbox will not work with the new carb), airbox mounting hardware, and all three required mounting gaskets. The choke rod is NOT included in this kit, but one can easily be fashioned from a piece of welding rod or even a coat hanger.

We stock Kitty Cat Carburetor rebuild kits for 1978-1999 models. The kit includes a new main jet, needle valve and gasket (float valve), pilot circuit adjustment screw, and float bowl gasket. THE EMULSION TUBE SHOWN TO THE LEFT IS NOT INCLUDED IN THIS KIT AS THEY HAVE BEEN RECENTLY DISCONTINUED. These kits include MOST of the parts that usually wear on on these carburetors.

We stock genuine Arctic Cat Kitty Cat carburetor needle valves and gasket sets. Also known as a float valve, this part threads into the body of the carburetor and limits the amount of fuel that flows into the carburetor bowl. The Arctic Cat part numbers included in this kit are 6505-293 and 6505-244 these parts fit 1977-1999 models.

We stock genuine Arctic Cat Kitty Cat carburetor float bowl gaskets. The Arctic Cat part number for this part is 6505-286 and it fits 1977-1999 models.

We stock genuine Arctic Cat Kitty Cat carburetor floats. This part fits all 1977-1999 Kitty Cat snowmobiles and the Arctic Cat part number is 6505-287.

We stock custom made aluminum air boxes for 1977-1999 model year Arctic Cat Kitty Cat snowmobiles. The original airbox for these machines, Arctic Cat part number 3002-486, is on backorder, so we designed and had these made out of aluminum. The intake holes are the same size as the original, so no changes need to be made to your carburetor to use this airbox. This box includes the rubber grommet for your choke rod (stops it from rattling - choke rod not included), mounting gasket, mounting hardware, and the rubber plugs to fill the bolt access holes in the back of the airbox. We will be updating our pictures soon to show the included parts. Please also be aware that the box will not come polished, but just as raw aluminum. Sorry folks, this box will not work with the stock carburetors on 1972 and 1973 models.

We used to stock genuine Arctic Cat Kitty Cat drive clutch assemblies. The Arctic Cat part number for this clutch is 0302-086 and it fits all 1972-1999 models.
AT THIS TIME WE ARE OUT OF STOCK OF THIS PART AND ARCTIC CAT IS NO LONGER MAKING THEM.

We offer aftermarket Kitty Cat drive chains. The genuine Arctic Cat Kitty Cat drive chain part number is 0300-122. Arctic Cat has discontinued this part, But we have just found a solution! The aftermarket chain we offer does have a master link, and will need to be cut down to size (70 link).

We offer genuine Arctic Cat Kitty Cat drive chain tensioner pucks and springs. This set of parts fit all 1977-1999 Kitty Cat models and comes with both the tensioner puck and the spring. The two Arctic cat part numbers included in this kit are 0302-081 and 0300-153.

We offer genuine Arctic Cat Kitty Cat drive sprockets. These sprockets have 42 teeth and fit all 1972-1999 model Kitty Cats. The Arctic Cat part number for this sprocket is 0300-156.

THIS PART IS OUT OF STOCK AND ARCTIC CAT STATES THAT THEY NO LONGER PRODUCE THIS. Arctic Cat Kitty Cat chain guards for all 1972-1999 models. This is the plastic cover that goes over the chain drive and clutch assembly and the Arctic Cat part number is 0302-060, which replaces part number 0301-059 on 1972 and 1973 models.

We offer genuine Arctic Cat Kitty Cat track drive shaft bearings for all years of the Kitty Cat. We sell these bearings individually (2 required per machine) and they come with the retaining collar and set screw. The Arctic Cat part number for each bearing is 0302-118.

We offer genuine Arctic Cat fuel tank assemblies for Kitty Cat snowmobiles. This kit will fit all 1972-1999 model Kitty Cats and comes with the tank itself, cap, petcock, and mounting bushing. The part number for this kit is 0770-038.

We offer genuine Arctic Cat Kitty Cat gas tank caps. These caps come equipped with a new gasket and fit all 1978-1999 models according to Arctic Cat. However, we have found that these caps will not fit 1% of Kitty Cats because they require a larger diameter cap (not available from Arctic Cat). These caps fit all Kitty Cat fuel tanks that have a 38 millimeter filler neck diameter at the base of the threads (not including the threads), as per the diagram to the left. Please be sure to measure your fuel tank filler neck before making your purchase to ensure fitment. The Arctic Cat part number for this cap is 0670-514.

We offer genuine Arctic Cat Kitty Cat fuel petcock and filter assemblies for all years of the Kitty Cat. If your 1972-1973 still has the stock steel fuel tank (valve threads into the tank), select the 1972-1973 model petcock below, but if your 1972 or 1973 model now has a plastic tank (plastic tank fits all years), select the petcock for 1977-1999 models, which comes with a rubber mounting bushing.

We offer engine top end parts for 1977-1999 Kitty Cat snowmobiles. We offer all the genuine Arctic Cat parts to replace pistons and rings. Sorry folks, we do not have access to these parts for 1972 and 1973 models. Please select the parts that you need below. These are special order items that typically ship 4-5 business days after the purchase is made.

0.040" Over-size pistons (and standard size pistons) are no longer available from Arctic Cat.

We offer quality aftermarket seal and gasket sets for Kitty Cat snowmobiles. These kits are available for two year ranges and include all the shaft seals and gaskets required for a full engine rebuild. Please be aware that the gear case cover gasket is NOT included in the kit for 1972 and 1973 models. Please be sure to select the correct year range below.

We offer carburetor and airbox mounting gasket sets for all 1977-1999 Kitty Cat snowmobiles. You can make this kit work on the 1972 and 1973 models, but the mounting holes have to be trimmed a little. The carburetor gaskets are quality aftermarket parts (includes 2 - one for each side of the carb spacer) and the airbox gasket (goes between carburetor and airbox) is a genuine Arctic Cat part.

WE CURRENTLY HAVE LIMITED STOCK, BOTH GASKETS MAY BE AFTERMARKET REPLACEMENTS DEPENDING ON WHAT WE CAN GET OUR HANDS ON.

We offer genuine Arctic Cat headlight bulbs for Kitty Cat snowmobiles. The Arctic Cat part number for this bulb is 0609-004 and it fits all Kitty Cats with a factory equipped headlight (1985-1999 models).

We offer genuine Arctic Cat kill switches for 1972-1999 Arctic Cat Kitty Cat snowmobiles. The Arctic Cat part number for this switch is 0609-007. Please be aware that this part does supersede the original handlebar mounted switch that mounts in the throttle lever housing on 1972-1980 models, but it does NOT mount the same way. Currently, no switch is available that fits in the original housing for 1972-1980 models. If your switch is toast on a 1972-1980 model, this switch can be mounted on the handlebars next to the throttle lever housing. Also, the white plastic plug covers on the switch will have to be removed to fit into the older Kitty Cat wiring harness.

We offer replacement OEM style ignition coils for 1985-1999 Arctic Cat Kitty Cats. The original coils, Arctic Cat part numbers 3005-138, 3003-148, 3003-191, and 3003-923, have been discontinued, so we sourced an OEM style coiil that fits and functions properly on these sleds.

We offer electronic ignition modules for all 1972-1981 Arctic Cat Kitty Cat snowmobiles, which use a points and condensor ignition systems. The original points and condensors for Kitty Cat snowmobiles are no longer available, but you're not out of luck. We sell electronic ignition control modules that completely replace the points and condensor set on the Kitty Cat. The module DOES NOT replace your ignition coil, which is still required to function properly. These kits are incredibly simple to install and we have super clear installation instructions.

Click HERE to see our detailed installation instructions.

We offer genuine Arctic Cat Kitty Cat keyed ignition switches for 1977-1999 models. This switch comes with two keys and the Arctic Cat part number for this switch is 0109-822.

IGNITION SWITCHES ARE CURRENTLY OUT OF STOCK AND ON FACTORY BACKORDER. WE WILL OFFER THEM AGAIN WHEN MORE ARRIVE.

Kitty Cat snowmobiles never came with handle bar grips, and the steel handlebar sure can make tiny hands cold, but we found that the stock grips for Arctic Cat 120 snowmobiles fit right onto the stock handlebar for Kitty Cats! These grips require that the stock plastic handlebar caps be removed, but they fit right on. We sell these grips in pairs and the part number for each grip is 1606-765. Please be aware that in the case of a shortage, the equivalent Yamaha brand 120cc snowmobile grips will be substituted.

We used to offer genuine Arctic Cat stock skis for Kitty Cats. AS OF NOW WE NO LONGER HAVE ANY OEM SKIS, AND THEY ARE NOW DISCONTINUED BY ARCTIC CAT.

Kittycatparts.com has Arctic Cat Kitty Cat ski skins! Made right here in the USA just for KittyCatParts.com, they are specifically molded for all model year stock Kitty Cat skis. These skins are made out of super durable and slippery 1/8" HDPE plastic and they fit just right! To keep the price down, you do have to drill the holes to mount them, which requires a 3/8" and 3/16" diameter drill bit. When mounting these skins, the rivet holes for the rubber tip bumpers are drilled out with the 3/16" drill bit to allow use of included stainless steel mounting hardware (not shown). The 3/8" drill bit is used to drill the holes for mounting the ski wear bars.
WE ARE CURRENTLY OUT OF SKI SKINS. MORE ARE ON ORDER.

We offer plastic ski kits for all years of the Arctic Cat Kitty Cat. These kits use PowerMadd brand plastic skis and steel war bars, and come equipped with our CNC cut stainless steel ski mounting bracket plates, steel mounting hardware, and replacement stainless steel pivot bolts and jam nuts. Our in-house designed mounting plates are cut from 12 ga. stainless steel and provide a small amount of height adjustment (in case one of your spindles are more worn than the other). Please be aware that our kit eliminates the leaf springs on your Kitty Cat, and depending on the year of your machine and how worn your spindles are, you may have to trim up to 3/16" off the width of your spindles to install our kit. The plastic skis in this kit are super slippery and greatly reduce the friction on the front of these machines making the sled easier for your micro rider to ride. They also look super trick! These kits typically ship about 4 business after the purchase is made.

We offer mounting kits for those who already own a set of PowerMadd plastic mini skis and want to mount them on their Kitty Cat snowmobile. This is the same set of parts that comes with the full kit that we list above and this kit DOES NOT include the actual skis or wear bars. Our kit comes with our CNC machined height adjustable stainless steel ski mounting bracket plates, steel mounting hardware, and replacement stainless steel pivot bolts and jam nuts. Please be aware that our kit eliminates the leaf springs on your Kitty Cat, and depending on the year of your machine and how worn your spindles are, you may have to trim up to 3/16" off the width of your spindles to install our kit.

We offer genuine Arctic ski spindle bushings for 1978-1999 model year Kitty Cat snowmobiles. This kit comes with the four plastic busings that press into the frame where the spindle goes through. The Arctic Cat for each bushing is 0302-088.

We offer genuine NGK spark plugs for Kitty Cats. The NGK part number for this spark plug is BR6HS and it is a stock replacement part for all years of the Kitty Cat.

We unfortunately can no longer get these pull starters for 1972-1997 model Kitty Cats. The Arctic Cat part number for this pull starter is 3002-493. We have not been able to find a solution to replace this as of yet. Even the individual parts inside these pull starters are no longer available.

We unfortunately can no longer get these pull starters for 1998-1999 model Kitty Cats. The Arctic Cat part number for this pull starter is 3005-135. We have not been able to find a solution to replace this as of yet. Even the individual parts inside these pull starters are no longer available.

We offer genuine Arctic Cat taillight assemblies for 1989-1999 model Kitty Cats. These lights come as a complete unit with wiring connector, so you just have to unbolt your broken light and plug in this one. The Arctic Cat has recently superseded the taillight for the LED one found on the newer 120's (0609-934). We only have the LED unit for sale at this time. Sorry folks, the taillight for 1985-1988 models is no longer available.

We offer Kitty Cat taillight bulbs. The Arctic Cat part number for this bulb is 0230-020 and it is a stock replacement part for all 1985-1999 models. In the event of a supply shortage, a substitute bulb will be utilized.

We offer Kitty Cat throttle cables. This cable fits 1977-1999 models and the Arctic Cat part number is 0687-134.

We offer Kitty Cat brake cables for the 1978-1999 model years. This OEM part is a direct fit.

1972-1977 MODEL YEAR BRAKE CABLES ARE OUT OF STOCK AND POSSIBLY NO LONGER MADE.

We offer genuine Arctic Cat Kitty Cat steering tierod ends. Please select the appropriate model year and side below when making your purchase. PLEASE be aware that the side listed below is when sitting on the machine and looking forward. This is differnet than what the packaging from Arctic Cat says

We offer replacement track bogie wheels for all years of the Kitty Cat snowmobile. This kit comes with a new bogie wheel with a sealed ball bearing, unlike the original without any bearing, and two aluminum spacers that make up for the difference in the width of the bearing and the original Arctic Cat wheel hub. The Arctic Cat part number that this kit replaces is 0302-101 and the wheel in this kit is the same height as the original.

Please be aware that a quantity of 1 of this kit will include one wheel with bearing and two spacers. If you need to replace multiple wheels on your Kitty Cat, you will have to order the same quantity of this kit.

We have reason to believe that Kitty Cat tracks are now completely done from the factory. Arctic Cat now states that they are "sold out", which typically means that we'll never see them again.

We offer genuine Arctic Cat track drive sprockets for all 1972-1999 model Kitty Cat snowmobiles. The Arctic Cat part number for these drive sprockets is 0300-179 and they are sold individually.

We offer genuine Arctic Cat rear track idler sprockets for all 1972-1999 model Kitty Cat snowmobiles. These sprockets mount at the very back of the track assembly and keep the track aligned. We sell these sprockets individually and come with the bearing installed. The Arctic Cat part number for each sprocket is 0300-178.

We offer genuine Arctic Cat rear track idler wheels for all 1972-1999 model Kitty Cat snowmobiles. Every Kitty Cat uses one of these wheels and they are installed on the rear-most track axle between the rear track idler sprocket above. The Arctic Cat part number for this bogie wheel is 0300-180.

We offer aftermarket Arctic Cat Kitty Cat windshields. They replace the Arctic Cat part number 0606-339 and they have a slight smoked tint to it. This shield is a replacement for all 1985-1999 model Kitty Cats (prior models were not equipped with a windshield).
AT THIS TIME WE ARE OUT OF STOCK OF THIS PART AND THEY ARE ON BACKORDER

We offer quality aftermarket fastener kits for Kitty Cat windshields and headlight bezels. Our kits come with four stainless steel mounting screws (original were just zinc plated steel), four expansion nuts, and four snap-on cover sets. One kit will replace the fasteners that hold on the windshield or the headlight bezel. If you need enough to replace the fasteners for both the windshield and headlight bezel, you will need to purchase two kits.

Kitty Cat hoods are now out of stock and we're pretty certain that Arctic Cat will not be making them again. At the moment, Arctic Cat states that they are "Sold Out", and with parts of this age, this typically means that they will be discontinued.

We offer Arctic Cat Kitty Cat hood latch kits for all years of the Kitty Cat. This kit comes with locally made reproduction hood straps that replace the now discontinued Arctic Cat straps (part number 0300-185), genuine Arctic Cat spring hooks, and aftermarket zinc plated mounting hardware. Please be aware that the factory bolt holes may have to be slightly over-sized to mount this kit.

THIS KIT IS CURRENTLY OUT OF STOCK. AS SOON AS MORE ARRIVE FROM OUR SUPPLIER, WE WILL OFFER THEM HERE AGAIN.

The belly pans are currently out of stock and we're pretty certain that Arctic Cat will not be making them again. At the moment, Arctic Cat states that they are "Sold Out", and with parts of this age, this typically means that they will be discontinued.

These reproduction Kitty Cat dash panels are made here in the US and the mold was made using an actual Arctic Cat dash console. These black HDPE plastic parts replace the now discontinued Arctic Cat part number 0302-045 and fit all years of the Kitty Cat. They do require all the mounting holes (including the ignition switch hole) be cut when installing, as well as a notch be cut for the taillight wire on taillight equipped models.

We have unfortunately lost our supplier for seat covers. We are on the lookout to find something that works.

WE RECOMEND A PIECE OF REFLECTAVE TAPE TO REPLACE THE UNAVAILABLE PLASTIC REFLECTOR. Just under 1 inch tall should work well.